[ofa-general] Re: Problem in IB network without Switch

[Jack Morgenstein]

You are running VERY old firmware (from 2004), and moreover, on one host
you have 3.0.0, and on the other 3.1.0.

You need to upgrade your firmware.
Contact your Mellanox FAE (support engineer) for instructions.

- Jack

>  Hi Jack,
> 
> Please find the output of ibstat on both the nodes, .
> 
> [root at mattool ~]# /opt/ofed/extras/hca_self_test.ofed 
> HCA Firmware Check ..................... FAIL
>     REASON: mismatch HCA #0 firmware detected (found v, need v3.5.917)
> Host Driver Initialization ............. PASS
> 
> [root at mattool ~]# 
> 
> ************ IBSTAT output ******************
> 
> 
> [root at mattool ~]# ibstat
> CA 'mthca0'
>         CA type: MT23108
>         Number of ports: 2
>         Firmware version: 3.1.0

> [root at compute-0-0 ~]# ibstat
> CA 'mthca0'
>         CA type: MT23108
>         Number of ports: 2
>         Firmware version: 3.0.0