[libfabric-users] psm3 for Mellanox NIC

[Niyaz Murshed]

Hello All,

Do PSM3 provider support Mellanox NIC?


Root#/libfabric# lshw -c net -businfo -numeric

Bus info          Device          Class          Description

============================================================

pci at 0000<https://lists.openfabrics.org/mailman/listinfo/libfabric-users>:01:00.0<mailto:pci at 0000<https://lists.openfabrics.org/mailman/listinfo/libfabric-users>:01:00.0>  eno1            network        I210 Gigabit Network Connection [8086:1533]



pci at 0000<https://lists.openfabrics.org/mailman/listinfo/libfabric-users>:40:00.0<mailto:pci at 0000<https://lists.openfabrics.org/mailman/listinfo/libfabric-users>:40:00.0>  ens2f0np0       network        MT2910 Family [ConnectX-7] [15B3:1021] (Mellanox Technologies MT2910 Family [ConnectX-7])



When I run fi_info, psm3 is only enabled on for the intel nic



root#fi_info -p psm3

provider: psm3

    fabric: TCP-10.118.91.0/24

    domain: eno1

    version: 306.10

    type: FI_EP_RDM

    protocol: FI_PROTO_PSMX3

provider: psm3

    fabric: TCP-10.118.91.0/24

    domain: eno1

    version: 306.10

    type: FI_EP_RDM

    protocol: FI_PROTO_PSMX3

provider: psm3

    fabric: TCP-10.118.91.0/24

    domain: eno1

    version: 306.10

    type: FI_EP_RDM

    protocol: FI_PROTO_PSMX3




root # ibv_devinfo
hca_id:     mlx5_0
      transport:              InfiniBand (0)
      fw_ver:                       28.39.3004
      node_guid:              946d:ae03:007d:a230
      sys_image_guid:              946d:ae03:007d:a230
      vendor_id:              0x02c9
      vendor_part_id:              4129
      hw_ver:                       0x0
      board_id:               MT_0000000834
      phys_port_cnt:               1
            port: 1
                  state:                  PORT_ACTIVE (4)
                  max_mtu:          4096 (5)
                  active_mtu:       1024 (3)
                  sm_lid:                 0
                  port_lid:         0
                  port_lmc:         0x00
                  link_layer:       Ethernet




root # lscpu

Architecture:            x86_64

  CPU op-mode(s):        32-bit, 64-bit

Vendor ID:               GenuineIntel

  Model name:            Intel(R) Xeon(R) Platinum 8480+


Is this expected?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/libfabric-users/attachments/20240620/2ac36ad8/attachment.htm>