[nvmewin] NVMe IO Generation using IOMETER

[Luse, Paul E]

No modification is needed.  The NVMe driver surfaced namespaces as SCSI LUNs under storport so iometer can be used either available the physical disk or one can put a file system on the target as well.

Thx
Paul

From: nvmewin-bounces at lists.openfabrics.org [mailto:nvmewin-bounces at lists.openfabrics.org] On Behalf Of Ramesh Mangamuri
Sent: Thursday, October 18, 2012 6:04 PM
To: nvmewin at lists.openfabrics.org
Subject: [nvmewin] NVMe IO Generation using IOMETER

All,
I have noticed that in the NVMe windows driver release notes, IOMETER tool was mentioned for testing NVMe Driver.
Does the IOMETER need a modification to use with NVMe Driver or we can use it without any modifications.If no modification is needed,can someone please explain how the block IO calls from IOMETER were mapped/connected to NVMe Windows driver Stack to generate traffic using this driver ?


Best Regards,
Ramesh

********************************************************************************************************************************************
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender.If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
*********************************************************************************************************************************************





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/nvmewin/attachments/20121019/3dc24b6c/attachment.html>