[Openib-windows] Windows SRP multipathing

[Andrey Slepuhin]

Currently I'm running build 1.0.0.506.

Best regards,
Andrey

Tzachi Dar wrote:
> What version of openib stack are you using?
> As far as I can tell there have been many changes in this area from the
> last build that openib has made.
> (this means that you will probably have to update your binaries).
>
> Thanks
> Tzachi 
>
>   
>> -----Original Message-----
>> From: openib-windows-bounces at openib.org 
>> [mailto:openib-windows-bounces at openib.org] On Behalf Of 
>> Andrey Slepuhin
>> Sent: Thursday, December 21, 2006 4:13 PM
>> To: openib-windows at openib.org
>> Subject: [Openib-windows] Windows SRP multipathing
>>
>> Dear folks,
>>
>> We have 4-node cluster system using 2 QLogic (Silverstorm) 
>> InfinIO 5000 switches, HP DL385 servers and HP MSA1500cs 
>> storage. The cluster is working under MS Windows Server 2003 
>> x64. We successfully installed IB stack including SRP 
>> drivers, and the logical disks on the storage are visible on 
>> the cluster nodes. The problem is that each disk is 
>> encountered 4 times due to the multiple paths. We tried HP 
>> DSM driver for Microsoft MPIO but unfortunately it doesn't 
>> work - it seems that the driver expects only QLogic and 
>> Emulex FC HBAs. Does anybody have an experience with IB SRP 
>> multipathing on Windows? Any help will be much appreciated.
>>
>> Thanks in advance,
>> Andrey Slepuhin,
>> Head of Cluster Solutions Center,
>> T-Platforms
>>
>> http://www.t-platforms.ru/english
>> tel.: +7 495 9565490, +7 495 7440995
>> fax:  +7 495 9565415
>> mob.: +7 916 1636117
>>
>>
>> _______________________________________________
>> openib-windows mailing list
>> openib-windows at openib.org
>> http://openib.org/mailman/listinfo/openib-windows
>>
>>