[Openib-windows] Windows SRP multipathing

[Tzachi Dar]

What version of openib stack are you using?
As far as I can tell there have been many changes in this area from the
last build that openib has made.
(this means that you will probably have to update your binaries).

Thanks
Tzachi 

> -----Original Message-----
> From: openib-windows-bounces at openib.org 
> [mailto:openib-windows-bounces at openib.org] On Behalf Of 
> Andrey Slepuhin
> Sent: Thursday, December 21, 2006 4:13 PM
> To: openib-windows at openib.org
> Subject: [Openib-windows] Windows SRP multipathing
> 
> Dear folks,
> 
> We have 4-node cluster system using 2 QLogic (Silverstorm) 
> InfinIO 5000 switches, HP DL385 servers and HP MSA1500cs 
> storage. The cluster is working under MS Windows Server 2003 
> x64. We successfully installed IB stack including SRP 
> drivers, and the logical disks on the storage are visible on 
> the cluster nodes. The problem is that each disk is 
> encountered 4 times due to the multiple paths. We tried HP 
> DSM driver for Microsoft MPIO but unfortunately it doesn't 
> work - it seems that the driver expects only QLogic and 
> Emulex FC HBAs. Does anybody have an experience with IB SRP 
> multipathing on Windows? Any help will be much appreciated.
> 
> Thanks in advance,
> Andrey Slepuhin,
> Head of Cluster Solutions Center,
> T-Platforms
> 
> http://www.t-platforms.ru/english
> tel.: +7 495 9565490, +7 495 7440995
> fax:  +7 495 9565415
> mob.: +7 916 1636117
> 
> 
> _______________________________________________
> openib-windows mailing list
> openib-windows at openib.org
> http://openib.org/mailman/listinfo/openib-windows
>