[ofw] RE: Building the correct IPoIB version for the correct OS

Tzachi Dar tzachid at mellanox.co.il
Mon Oct 26 09:13:59 PDT 2009


There was no real reason for that. I guess that we have copied it from
somewhere.

Feel free to change it.

Thanks
Tzachi 

> -----Original Message-----
> From: Smith, Stan [mailto:stan.smith at intel.com] 
> Sent: Monday, October 26, 2009 5:56 PM
> To: Tzachi Dar
> Cc: ofw at lists.openfabrics.org
> Subject: RE: Building the correct IPoIB version for the correct OS
> 
> Hello,
>   Comments below.
> 
> Tzachi Dar wrote:
> > Yes, you're right:
> > 1. The "dirs" file should contains ipoib_NDIS6_CM 2. The add-on to 
> > makefile of ipoib based on NDIS 5:
> > #
> > # prevent the Build utility from building the driver for later # 
> > version of the operating system than windows 2003 #
> > MAXIMUM_NT_TARGET_VERSION=0x502
> >
> > !INCLUDE ..\..\..\inc\openib.def
> >
> > 3. The add-on to makefile of ipoib based on NDIS 6:
> > #
> > # prevent the Build utility from building the driver for an 
> earlier # 
> > version of the operating system than vista/Win 2008.
> > #
> > MINIMUM_NT_TARGET_VERSION=0x600
> >
> > !INCLUDE ..\..\..\inc\openib.def
> >
> > We already updated SVN with these changes on revision 2506.
> 
> OK.
> 
> One small question.
> What is the logic in using a hard coded OS version constant 
> instead of the self-documenting, MSFT suggested symbolic constant?
> 
> $(_NT_TARGET_VERSION_WS03)
> $(_NT_TARGET_VERSION_VISTA)
> 
> 
> >
> > Thanks
> > Tzachi
> >
> >> -----Original Message-----
> >> From: Stan C. Smith [mailto:stan.smith at intel.com]
> >> Sent: Friday, October 23, 2009 9:50 PM
> >> To: Tzachi Dar
> >> Cc: ofw at lists.openfabrics.org
> >> Subject: Building the correct IPoIB version for the correct OS
> >>
> >>
> >> Hello,
> >>   Are you the correct person to be fielding IPoIB questions these 
> >> days? I'll assume so for now.
> >>
> >> Given the requirement NDIS6 IPoIB is only for Vista/Svr2008 and 
> >> beyond, then to prevent ipoib.sys name space overlap/overwrite, is 
> >> the following what you had in mind for NDIS5.3 ipoib builds? 
> >> Assumption is the ulp\dirs file contains entries for both ipoib & 
> >> ipoib_ndis6_cm.
> >>
> >> --- C:/Documents and Settings/scsmith/Local
> >> Settings/Temp/make-revBASE.svn004.tmp        Fri Oct 23 
> 12:43:20 2009
> >> +++ C:/Documents and Settings/scsmith/My
> >> Documents/openIB-windows/SVN/gen1/trunk/ulp/ipoib/kernel/m
> >> akefile      Fri Oct 23 12:44:57 2009
> >> @@ -4,4 +4,8 @@
> >>  # that is shared by all the driver components of the 
> OpenIB Windows  
> >> project. #
> >>
> >> +# Build this NDIS 5.3 ipoib for Windows versions prior to 
> Vista/Svr
> >> +2008 +
> >> +#MAXIMUM_NT_TARGET_VERSION=$(_NT_TARGET_VERSION_WS03) +
> >>  !INCLUDE ..\..\..\inc\openib.def
> 
> 



More information about the ofw mailing list