[ofw] SRP target from OpenSolaris not recognized

[Grüninger, Andreas (LGL Extern)]

I attached the log to this email.

Thanks
Andreas

-----Ursprüngliche Nachricht-----
Von: Tzachi Dar [mailto:tzachid at mellanox.co.il] 
Gesendet: Sonntag, 29. August 2010 17:11
An: Grüninger, Andreas (LGL Extern); ofw at lists.openfabrics.org
Betreff: RE: SRP target from OpenSolaris not recognized


Can you please download our checked driver (ibsrp.sys) and copy it to the windows\system32\drivers directory.
Please run debugview on your machine. Next, please disable the device and enable it again.
Please send us the log of the error that you will get.

You can find the debug version of the driver in the symbol zip file that is in our website. You can also send me the type of your system (2003/8 32/64bits) and I'll send you the driver file.


Thanks
Tzachi

> -----Original Message-----
> From: ofw-bounces at lists.openfabrics.org [mailto:ofw- 
> bounces at lists.openfabrics.org] On Behalf Of Grüninger, Andreas (LGL
> Extern)
> Sent: Sunday, August 29, 2010 5:59 PM
> To: ofw at lists.openfabrics.org
> Subject: [ofw] SRP target from OpenSolaris not recognized
> 
> Hallo
> 
> I installed
> - SRP target OpenSolaris B134 with SUNWhermon driver
> - MLNX_VPI_wnet_x64.msi on Windows Server 2003 x64 SP2
> - MLNX_OFED_LINUX v1.4 with OpenSM 3.3.0 on SLES10 SP2
> - VMWare release-1.4.1-222
> - Infiband cards: ConnectX Dual-Port DDR MHQH29-XTC
> 
> The SRP targets can be used with initiators from Linux and ESX.
> 
> On Windows the SRP target is not recognized.
> 
> After the installation of the Mellanox driver package the target is 
> shown in the device manager as:
> Other devices
>    ? Solaris SRP Target 0.9a
> 
> In the details of the device I found for "Compatible Ids" the values
> IBA\C0100c690ep0108r0001
> IBA\C0100c690ep0108
> 
> In ib_srp.inf these values are defined [SRP.DeviceSection.ntx86] 
> %SRP.DeviceDesc% = SRP.DDInstall,IBA\C0100c609ep0108r0001, \
> 
> 	IBA\Cff00c609ep0108r0001, \
> 								IBA\C0100c609ep0108, \
> 								IBA\Cff00c609ep0108
> 
> This seems to be a number turner.
> Most probably the error is on the side of OpenSolaris sending the 
> wrong ids.
> 
> When I change the inf like this
> 
> [SRP.DeviceSection.ntamd64]
> %SRP.DeviceDesc% = SRP.DDInstall,IBA\C0100c609ep0108r0001, \
> 
> 	IBA\Cff00c609ep0108r0001, \
> 								IBA\C0100c609ep0108, \
> 								IBA\Cff00c609ep0108, \
> 
> IBA\C0100c690ep0108r0001, \
> 								IBA\C0100c690ep0108
> the miniport driver can be installed and is put under
> 
> 
> SCSI and RAID controllers
>    Mellanox Infiniband SRP Miniport
> 
> But the driver cannot be started with the message "This device cannot 
> start. (Code 10)"
> 
> I checked the drivers from http://www.openfabrics.org/ too but to no 
> avail.
> 
> Are there chances to use SRP targets from OpenSolaris?
> 
> 
> Kind regards
> 
> Andreas
> _______________________________________________
> ofw mailing list
> ofw at lists.openfabrics.org
> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ZD-DB-S72.zip
Type: application/x-zip-compressed
Size: 2732 bytes
Desc: ZD-DB-S72.zip
URL: <http://lists.openfabrics.org/pipermail/ofw/attachments/20100829/87940762/attachment.bin>