[ofw] SRP debugging level

[John Carbone]

As per
http://www.mellanox.com/related-docs/prod_software/MLNX_WinVPI_ReleaseNo
tes.txt

 

"- Removed support for SDP/SRP/WSD"

 

From: Smith, Stan [mailto:stan.smith at intel.com] 
Sent: Wednesday, November 20, 2013 1:49 PM
To: John Carbone
Subject: RE: SRP debugging level

 

From: John Carbone [mailto:john-carbone at quantum-logic.com] 
Sent: Wednesday, November 20, 2013 10:46 AM
To: Smith, Stan; ofw at lists.openfabrics.org
Subject: RE: SRP debugging level

 

Hi, I was under the impression that Mellanox no longer supported SRP for
windows. But, I'm happy to look into this. Thank you.

 

I'm not a Mellanox stack expert these days, although if the bits are in
the Mellanox distro then there would be support.

Not clear why Mx would drop SRP?

 

Stan.

 

From: Smith, Stan [mailto:stan.smith at intel.com] 
Sent: Wednesday, November 20, 2013 1:44 PM
To: John Carbone; ofw at lists.openfabrics.org
Subject: RE: SRP debugging level

 

Hello,

  If at all possible I would suggest using the Mellanox WinOF 4.40 (or
beyond) IB stack for Windows.

SRP on winOFED assumes a rather old SRP target interface.

Bottom-line is the SRP support in the Mellanox stack is more current and
there are Mellanox folks who can assist.

 

Sorry - winOFED has faded from the landscape due to lack of
participation.

 

Stan.

 

From: ofw-bounces at lists.openfabrics.org
[mailto:ofw-bounces at lists.openfabrics.org] On Behalf Of John Carbone
Sent: Wednesday, November 20, 2013 7:08 AM
To: ofw at lists.openfabrics.org
Subject: [ofw] SRP debugging level

 

Hi all,

 

I'm trying to determine why SRP is not assigning target numbers with
WinOF. Is there a way to change the debug level without compiling? Where
can the output of SRP_PRINT be found?

 

Any help would be greatly appreciated. Thank you.

 

Kind regards,

John.

 

John Carbone | Quantum Logic Corporation
1225 Franklin Avenue, Suite 325 | Garden City, NY 11530
p: 800.482.2105 | f: 516.873.8881

john-carbone at quantum-logic.com

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ofw/attachments/20131120/3182bf29/attachment.html>