[Users] Help with IBsim

[Robert LeBlanc]

I'm not a programmer, so please excuse me if this should be obvious. I was
able to get IBsim running with the topology from our IB fabric loaded, I've
got opensm running against IBsim and doing things like ibtracert gives back
the exact results as we get on our IB fabric.

When trying to do commands in IBsim like clear to reset the links for a
node, I can't find the correct nodeid vaule to pass in. Here is a dump and
what I've tried.

...snip...
Ca 2 "H-0002c903002b174a"       nodeguid 2c903002b174a  sysimgguid
2c903002b174a
2c903002b174b   [1]     "S-001397010a000043"[7]  lid 75 lmc 0 smlid 52  4x
 2.5G Active/LinkUp
2c903002b174c   [2]     "S-001397010a000043"[6]  lid 76 lmc 0 smlid 52  4x
 2.5G Active/LinkUp
#  dumped 94 nodes

sim> clear 2c903002b174a
# unlink: bad parameter in "clear 2c903002b174a
"
sim> clear 0002c903002b174a
# unlink: bad parameter in "clear 0002c903002b174a
"
sim> clear 0x0002c903002b174a
# unlink: bad parameter in "clear 0x0002c903002b174a
"
sim>

If there is some documentation available for IBsim? I was not able to find
it through searching on Google. I am also interested in setting up a fifo
so that I can use a script to pass in fabric changes, then run some
commands, make fabric changes, run commands, rinse and repeat. I could use
some help/documentation for that as well.

Thanks,

Robert LeBlanc
OIT Infrastructure & Virtualization Engineer
Brigham Young University
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/users/attachments/20131009/4e3a533a/attachment.html>