[Users] ibsim updates routing tables?

[Robert LeBlanc]

I'm trying to test routing in ibsim, but it doesn't seem to update the
routing tables in the simulated switches. If I take a link down using the
clear command in ibsim, I see opensm saying that it is updating the routing
tables and that it completes, but I can't ibtracert to the LID who's path
was taken down.

Should ibsim and opensm be reconfiguring routing in the simulated
environment? No matter which routing protocol I select in opensm, the
routes are always the same, even having opensm re-LID the entire fabric
doesn't help. Any help would be appreciated.

Output from opensm:

******************************************************************
***** LID ASSIGNMENT COMPLETE - STARTING SWITCH TABLE CONFIG *****
******************************************************************


Oct 22 16:27:20 330198 [8437A700] 0x04 -> osm_ucast_mgr_build_lid_matrices:
Starting switches' Min Hop Table Assignment
Oct 22 16:27:20 330954 [8437A700] 0x02 -> osm_ucast_mgr_process: minhop
tables configured on all switches
Oct 22 16:27:20 331191 [8437A700] 0x04 -> do_sweep:


******************************************************************
**************** SWITCHES CONFIGURED FOR UNICAST *****************
******************************************************************


Thanks,

Robert LeBlanc
OIT Infrastructure & Virtualization Engineer
Brigham Young University
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/users/attachments/20131022/b90d3361/attachment.html>