[ewg] OFA EWG Meeting: Monday, Sept 9th, 2019 - 9:00 am PST - Minutes

[oulijun]

在 2019/9/11 1:50, Davis, Arlin R 写道:
>
> *_Attendees                    Company          _*
>
> Devesh Sharma            Broadcom    
>
> Bill Snapko                    HPE   
>
> Arlin Davis                     Intel                                
>
> Jim Ryan                        OFA
>
> Rupert Dance               SW Forge
>
> Vladimir Sokolovsky    Mellanox
> Adit Ranadive               VMware
>
>  
>
> *Minutes:*
>  
> ·        *Opens*
> ·        Request to add latest RH7.7 and SLES 15.1 to release, Vlad will add to backports.
> ·        If you need to prioritize backports, start with RH7.7.
> ·        IBTA 36^th InfiniBand/RoCE Plugfest (Oct 21^st ) may use OFED 5.3, will re-evaluate in the coming weeks.
>  
> ·        *OFED-5.3 – *https://downloads.openfabrics.org/downloads/OFED/ofed-5.3-daily/OFED-5.3-20190906-1339.tgz
>
>   * rdma_core-25.0 and kernel.org 5.3 (rc4) (note: hns drivers included)
>   * Currently supported OSes: SLES15.0, SLES12 SP4, RHEL8.0, RHEL7.6
>   * Currently available backports: IB core, IPoIB, iSER, SRP, mlx4
>   * DAPL build fails on RH8.0 – bug reported (Arlin will investigate, time to deprecate DAPL?)
>   * Build is ready for device vendors to immediately start backports
>       o Vlad did the hard work, use his backports for examples
>       o Should only take about 1-2 days for your backports
>   * If needed, send ewg any request to add new libraries, packages, or drivers
>
>  
> _Additional information to integrate (email ewg and Vlad if you need assistance):_
> _compat-rdma git trees:_ git://git.openfabrics.org/compat-rdma/compat-rdma.git master - compat-rdma backport patches, system services and utilities git://git.openfabrics.org/compat-rdma/linux-5.3.git master - Set of relevant sub trees (as is) from upstream linux kernel 5.3 (rc4) - will be updated to 5.3 release. Used to improve clone/build time. git://git.openfabrics.org/compat-rdma/compat.git ofed - backport headers and functionality - config/rdma.m4 - autotools script used to scan kernel headers and define macros used by backport headers and patches To build working tree for manual compilation: # mkdir ofed # cd ofed # git clone git://git.openfabrics.org/compat-rdma/compat-rdma.git # git clone git://git.openfabrics.org/compat-rdma/linux-5.3.git # git clone git://git.openfabrics.org/compat-rdma/compat.git # OFED_EWG_DIR=$PWD # cd compat-rdma # GIT_TREE=${OFED_EWG_DIR}/linux-5.3 GIT_COMPAT_TREE=${OFED_EWG_DIR}/compat ./scripts/admin_rdma.sh -n -p To compile drivers: #
> ./configure --with-core-mod --with-ipoib-mod --with-ipoib_debug-mod --with-ipoib_debug_data-mod --with-user_mad-mod --with-user_access-mod --with-addr_trans-mod --with-mlx4-mod --with-mlx4_core-mod --with-mlx4_en-mod --with-mlx4_inf-mod --with-mlx4_debug-mod --with-ipoib-cm --with-srp-mod --with-iser-mod --with-iscsi-mod --with-isert-mod Add other relevant flags... # make # make install
> Please correct/add anything I missed.
>  
> Regards,
>  
> Arlin
>  

Hi, Arlin

   I am testing the OFED-5.3 in hip08 use

**https://downloads.openfabrics.org/downloads/OFED/ofed-5.3-daily/OFED-5.3-20190906-1339.tgz However, it is fail. The operations as follows: 1. tar xzvf OFED-5.3-20190906-1339.tgz 2. cd OFED-5.3-20190906-1339 3. install.pl root at ubuntu:/home/mars/OFED-5.3-20190906-1339# ./install.pl Smartmatch is experimental at ./install.pl line 2720. sh: 1: rpm: not found sh: 1: rpm: not found sh: 1: rpm: not found sh: 1: rpm: not found OFED Distribution Software Installation Menu 1) View OFED Installation Guide 2) Install OFED Software 3) Show Installed Software 4) Configure IPoIB 5) Uninstall OFED Software Q) Exit select 2 , OFED Distribution Software Installation Menu 1) Basic (OFED modules and basic user level libraries) 2) All packages 3) Customize Q) Exit Select Option [1-3]:2 Below is the list of OFED packages that you have chosen (some may have been added by the installer due to package dependencies): 0 packages selected. Exiting... The hns drvier will not directly use. Thanks Lijun Ou

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20190920/01788b00/attachment-0001.html>