[nvmewin] SCSI to NVMe Mapping

[Uma Parepalli]

Hi Amber/Peter/Kevin/Kwok and all,

The "NVM Express: SCSI Translation Reference" document doesn't provide a direct mapping for "REQUEST SENSE" but has the following Note:

"MODE SELECT(6), MODE SELECT(10), REQUEST SENSE and TEST UNIT READY commands do not map 1-to-1 to NVM Express commands; a device driver should translate as specified in the referenced sections."



Could you please explain what would be the above commands are equal to in the NVMe world?

I would like to hear from both NVMe forum and Windows Driver world.



Attaching the document since I know you (we) are all busy with Flash Memory Summit :)



Thank you,

Uma
Uma Parepalli
Cell: 408 805 9260
uma.parepalli at skhms.com<mailto:uma.parepalli at skhms.com>
SK Hynix Memory Solutions Inc.
3103 North 1st Street, San Jose, CA

The information contained in this e-mail is considered confidential of SK hynix memory solutions Inc. and intended only for the persons addressed or copied in this e-mail. Any unauthorized use, dissemination of the information, or copying of this message is strictly prohibited. If you are not the intended recipient, please contact the sender immediately and permanently delete the original and any copies of this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/nvmewin/attachments/20140806/f0821b1b/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: NVM_Express_-_SCSI_Translation_Reference-1_2_03172014.pdf
Type: application/pdf
Size: 1215812 bytes
Desc: NVM_Express_-_SCSI_Translation_Reference-1_2_03172014.pdf
URL: <http://lists.openfabrics.org/pipermail/nvmewin/attachments/20140806/f0821b1b/attachment.pdf>