[ofw] RE: OSM fails test with "insufficient memory"

[Eitan Zahavi]

Hi James,

I am a little rusty on IBAL MAD layer (been 2 years since I worked on
it).
With that disclaimer : It used to be that only a single client only
could be 
registered for each class/attribute on the IBAL MAD layer. 

The error in that case would be during the "bind" call to the OSM
vendor.

Just a hint


Eitan Zahavi
Senior Engineering Director, Software Architect
Mellanox Technologies LTD
Tel:+972-4-9097208
Fax:+972-4-9593245
P.O. Box 586 Yokneam 20692 ISRAEL

 

> -----Original Message-----
> From: ofw-bounces at lists.openfabrics.org 
> [mailto:ofw-bounces at lists.openfabrics.org] On Behalf Of 
> Livingston, James
> Sent: Wednesday, August 01, 2007 10:08 PM
> To: Erez Cohen
> Cc: ofw at lists.openfabrics.org
> Subject: [ofw] RE: OSM fails test with "insufficient memory"
> 
> Hi Erez,
> 
> Um... I ran omstest in order to test the operation of opensm, 
> which I had started from the Windows Services control in the 
> management console.
> I had also made it start automatically during boot, but I am 
> sure it was said to be running when I tried osmtest, in the 
> case from which I sent you the output.
> 
> I ask the question again. Is there some reason you can think 
> of why osmtest should not run successfully, while opensm is operating?
> 
> Cheers,
> jwl
> 
> -----Original Message-----
> From: Erez Cohen [mailto:erezc at mellanox.co.il]
> Sent: Wednesday, August 01, 2007 3:25 AM
> To: Livingston, James
> Cc: ofw at lists.openfabrics.org
> Subject: RE: OSM fails test with "insufficient memory"
> 
> Hi  James,
> 
> Please run opensm, not osmtest. Osmtest is a testing tool for opensm.
> You should also be able to find a service called opensm so 
> you can set it to start during boot time.
> 
> 
> Best regards, 
> 
> Erez Cohen
> Field Application
> Development Manager
> 
> Mellanox Technologies Ltd. 
> Tel : + 972 - 4 - 9097200 ext 378
> Cell : + 972 - 54 - 5468801
> Fax : + 972 - 4 - 9593245
> www.mellanox.com
> 
> -----Original Message-----
> From: Livingston, James [mailto:James.Livingston at necam.com]
> Sent: Wednesday, August 01, 2007 3:29 AM
> To: Erez Cohen
> Cc: ofw at lists.openfabrics.org
> Subject: OSM fails test with "insufficient memory"
> 
> Hi Erez,
> 
> Here is a result that I encountered after I had installed 
> WinOF v1.0 on Windows Server 2003 CCE, and started OSM on the 
> head node of a compute cluster. What might I have failed to 
> do, or done incorrectly?
> 
> I have also included the vstat -v output in the attached file.
> 
> Cheers,
> jwl
> 
> James Livingston
> NEC Corporation of America
> Redmond Technology Center
> Engineering and Testing Group
> 14335 NE 24th St., Suite 104
> Bellevue, WA 98007
> Mailto: James.Livingston at necam.com
> Tel: 425-373-4415; FAX 425-643-3154
> _______________________________________________
> ofw mailing list
> ofw at lists.openfabrics.org
> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw
>