[ofw] SRP Initiator Issue

Fab Tillier ftillier at windows.microsoft.com
Tue May 8 12:33:52 PDT 2007


When you look at the DM queries, do you see any service entries reported
in the IOC profile of the SRP target?  Are these service entries
properly formatted (i.e. follow the SRP spec)?

Without service entries you won't get any connections.

-Fab

-----Original Message-----
From: ofw-bounces at lists.openfabrics.org
[mailto:ofw-bounces at lists.openfabrics.org] On Behalf Of Josh Morris
Sent: Tuesday, May 08, 2007 12:19 PM
To: ofw at lists.openfabrics.org
Subject: [ofw] SRP Initiator Issue

I am having some issues connecting to an SRP target using the OpenIB 
Windows drivers (version 1.0.0.614). The setup consists of an server 
running Windows Server 2003 directly connected to the SRP target. The IB

drivers install, however when installing the InfiniBand SRP Miniport a 
failure occurs with the error "Device cannot start (Code 10)." The 
subnet manager is openSM and is running on the Windows server.

Some digging  in the list archives revealed that this error is typically

caused when the target does not accept the initiator's login request. I 
captured a packet trace and do not see the initiator transmit the login 
request. I do see subnet management and device management MADs, but 
there are no communication management MADs. I also see some suspicious 
packets containing a GRH scattered throughout the trace. The destination

GID of the GRH does not match the GID of the target.

The HCA is a Mellanox PCIe card(MHEL-CF128-T) with firmware version 
4.8.200. If I can provide any further information please let me know.

Thank you,

Josh Morris
josh.morris at texmemsys.com
_______________________________________________
ofw mailing list
ofw at lists.openfabrics.org
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw



More information about the ofw mailing list