[ofw] ConnectX driver code

[Leonid Keller]

The branch has been re-created.
Enjoy ! :) 

> -----Original Message-----
> From: ofw-bounces at lists.openfabrics.org 
> [mailto:ofw-bounces at lists.openfabrics.org] On Behalf Of Leonid Keller
> Sent: Sunday, March 23, 2008 7:33 PM
> To: Sean Hefty; ofw at lists.openfabrics.org
> Subject: RE: [ofw] ConnectX driver code
> 
> Guys, the new driver uses EXACTLY the same IBAL interface 
> like the previous one (MTHCA)!
> There is NO essential changes neither in IBAL nor in ULPs so far.
> I've put the new driver code to enable its reviewing and evaluating.
> The readme file [attached this time] contains the answers to 
> most of your so far questions. 
> [And, as Tzachi wrote, with WinMerge one could have found all 
> the changes in a minute]
> 
> After all this said: I'll re-create the branch after checking 
> that it gets built and works.
> 
> 
> > -----Original Message-----
> > From: Sean Hefty [mailto:sean.hefty at intel.com]
> > Sent: Friday, March 21, 2008 6:55 PM
> > To: Hefty, Sean; Leonid Keller; ofw at lists.openfabrics.org
> > Subject: RE: [ofw] ConnectX driver code
> > 
> > >Can you please re-create the branch, apply only the real
> > changes to the
> > >branch, and commit that, so we can understand what exactly
> > is changing?
> > 
> > To be clear, here's what I'm asking for:
> > 
> > 1. Move your local copy of branches\connectx off into some 'temp' 
> > location.
> > 2. svn delete branches\connectx from svn 3. From the trunk, 
> create a 
> > new branch to branches\connectx.
> >    TortoiseSVN does this by right clicking on trunk, and selecting 
> > branch.
> >    If done correctly, you should see a simple 1-line svn 
> log message.
> > 4. Move 'temp'\connectx\hw\mlx4 back to branches\connectx\ 5. 
> > svn add the hw\mlx4 directory and files back to svn 6. svn 
> commit this 
> > change.
> > 
> > If you have any changes outside of the mlx4 directory (e.g. 
> > hw\dirs file), you will need to copy those files back into 
> the tree as 
> > well.  Each change set should be self-contained and committed 
> > separately.
> > 
> > This will let us see what the real differences between the 
> branch and 
> > the trunk are, makes it easier to pull specific change sets between 
> > branches, avoids changing every file in the tree, and will 
> allow the 
> > branch to be merged back into the trunk in the future.
> > 
> > - Sean
> > 
> > 
>