[ofw] Adding Performance Counters support for WinOF

[Alex Estrin]

Hello,

IMHO adding globally perf. counters to the stack is not parctical since it will impact all UM protocols.
Besides it would overlap with already existing counters implemented in other levels of data path (IPoIB can be monitored through standard TCP/IP counters).
I'd rather consider of adding performance counters per protocol DLL (uDAPL is a good candidate).
As a reference point WSD perf. counters implmentation can be used.

Thanks,
Alex.

> -----Original Message-----
> From: ofw-bounces at lists.openfabrics.org 
> [mailto:ofw-bounces at lists.openfabrics.org] On Behalf Of Tzachi Dar
> Sent: Tuesday, January 13, 2009 8:46 AM
> To: Moshe Haim; ofw at lists.openfabrics.org
> Subject: RE: [ofw] Adding Performance Counters support for WinOF
> 
> Please see bellow.
>  
> Thanks
> Tzachi
> 
> 
> ________________________________
> 
> 	From: Moshe Haim [mailto:Moshe-ha at orbotech.com] 
> 	Sent: Monday, January 12, 2009 4:32 PM
> 	To: Tzachi Dar; ofw at lists.openfabrics.org
> 	Subject: [ofw] Adding Performance Counters support for WinOF
> 	
> 	
> 
> 	Hi Tzachi,
> 
> 	 
> 
> 	A few months ago I posted the following thread, when 
> trying to figure out how to use WinOF counters for checking 
> the usage over IB (uDapl).
> 
> 	http://lists.openfabrics.org/pipermail/ofw/2008-May/002627.html
> 
> 	 
> 
> 	To summarize, I suggested implementing windows 
> performance counters dll to be included in WinOF bundle since 
> it looks to me as the right thing to do in order to get that 
> information.
> 
> 	Since then, I had to drop the issue temporarily due to 
> issues with my product.
> 
> 	 
> 
> 	I would like to get back on this soon and have several 
> questions:
> 
> 	1.	Is there anyone that already works on adding 
> this feature? If so can you please point me to that person?  
> 
> 	I don't know of any one working on this issue. The work 
> that Sean mentioned doesn't seem what you want as they are 
> working on a library that is not a performance counter dll.
> 
> 	1.	In my pervious attempts to get the performance 
> counters of IB I used the code inside vstat.c to retrieve the 
> information: 
> 
> 		a.	Is this method of accessing the counter 
> data the mostly recommended method? If not, can you please 
> point me to one? 
> 		b.	The counter data is 32-bit long, and as 
> far as I recall was to be multiplied by 4 in order to get the 
> actual number of transferred bytes.
> 			This means that the counter maximum is 
> 2^34-1, which is only 16GB of data.
> 			Using IB at full or even less capacity 
> would fill up the counters very quickly (16 seconds in rate 
> of 1GB/sec...).
> 			From this post: 
> http://lists.openfabrics.org/pipermail/ofw/2008-May/002602.htm
> l I understood there is an option of using extended 64-bit counters.
> 			Is this mechanism implemented in WinOF? 
> 
> 	 The method that in vstat is actually sending a local 
> mad to the hca. This is indeed the recommended method to get 
> this data from the port.
> 
> 	Currently there is no way to get the 64 bits 
> information, since the hca's fw doesn't support it.
> 
> 	 
> 
> 	 
> 
> 	 
> 
> 	Thanks,
> 
> 	Moshe.
> 
> 	 
> 
> 	 
> 
> 	 
> 
>