[Users] opensm params

[Russell Dekema]

I only have a limited amount of experience with FDR equipment, but we
do have a couple of FDR (not FDR10) leaf type switches with QDR
(ConnectX-2 and/or ConnectX-3) HCAs up and running on them.

Cheers,
Rusty Dekema

On Mon, Jun 5, 2017 at 11:34 AM, Michael Di Domenico
<mdidomenico4 at gmail.com> wrote:
> On Mon, Jun 5, 2017 at 11:11 AM, Hal Rosenstock
> <hal.rosenstock at gmail.com> wrote:
>> For some port stuck at FDR10, is FDR enabled on both local port and peer
>> port ?
>
> apparently, this might be a case of works as designed.  i'm confirming
> with others now, in that we have FDR10 switch spines/leafs instead of
> FDR switch spines/leafs, therefore i suspect we cannot run FDR 56Gb
>
> what also isn't clear yet, is if we swapped the FDR10 spines/leafs
> with FDR spine/leafs whether our QDR HCA's would still work
>
> i wasn't aware FDR came in two versions, guess i have some reading up to do
>
>> What is OpenSM version string ?
>
> we're running 3.3.17, from the rhel6.9 distro
> _______________________________________________
> Users mailing list
> Users at lists.openfabrics.org
> http://lists.openfabrics.org/mailman/listinfo/users